Splash Pools- Variable Speed Pumps Save Energy and Money

You may not know that that a standard pool pump uses more electricity than any other

appliance in the home, except for an air-conditioner. You also may not know that most

pumps are too big and use more energy than you need to keep the water sparkling

clean.

The culprit: a single-speed pump. A small pump is probably fine if all you want to do is

circulate the water, but it might not have enough speed to run your pool cleaner,

waterfall or other electrical extras that need a blast of energy.

If that's the case, your pool service probably installed a pump large enough to handle

the extras. But with only one speed, it's running full-blast even when your pool cleaner

and waterfall aren't operating.

That huge waste of energy is costing you about 80 percent more in electric bills.

Don't let the high cost of running your pool outpace its value as your family's go-to place

for fun, relaxation and keeping cool. Making your pool more energy-efficient will save

hundreds of dollars a year. Here are a few tips.

• Replace your single-speed pump with a variable-speed unit. High-performance models

from such manufacturers as Pentair Water Pool and Spa let you run them on low most

of the time. You can crank them up bit by bit when you need to run accessories.

The manufacturers claim the pumps can cut energy use by up to 90 percent compared

with single-speed pumps. Frank Bowman, owner of Splash Pools in Raleigh, North

Carolina, says his customers who have switched report saving $300 or more a year on

their electric bills.

A variable-speed pump costs more than twice a single-speed model, but you'll recoup

the cost in lower electric bills within two years, he estimates. Plus, he says, the pumps

are quieter and last longer than older pumps.

As an alternative, two-speed pumps cost less than variable-speed models. And

although they're not as efficient as variable-speed pumps, they use far less energy than

the single-speed unit.• Run your pool pump less often. Most manufacturers recommend

running it between eight and 10 hours a day in the summer and about half that in the

winter.

• Put a timer on the pump so it automatically shuts off, and set it to run only when you're

paying off-peak rates.

• Switch to LED lighting, which uses up to 75 percent less energy than traditional

incandescent underwater lights, and lasts for years.

• Keep your chemicals in balance. If you don't, your filter can run non-stop and the water

will never sparkle.

• Clean trap baskets, filters, and pool walls and floor regularly. Clogging can prevent the

water from flowing freely. The harder the pump has to work, the more you'll pay to run it.

Submitted By: Splash Pools serves all of North Carolina, Raleigh, Chapel Hill, Cary, Lake Gaston and the Triangle . We are a complete outdoor contractor installing outdoor kitchens & fireplaces, natural stone & paver patios, landscaping, swimming pools & spas, pool houses, cabanas and much more...Our speciality is unique and unusual swimming pools & spas. Visit Splash Pools of North Carolina at www.splashpoolsnc.com or Contact us at Frank@FrankBowman.com or (919) 291-8354.